 Banging noise!, Changed axel, bearing, hub & the whole spindle... |
 Mar 9, 2012 - 9:38 PM
|
 
|
|
Enthusiast  Joined Dec 11, '07 From Davie, Florida Currently Offline Reputation: 4 (100%)  |
Hey guys,
Really getting kind of frustrated with this & would really appreciate your help; so my passenger side hub & bearing went bad a couple weeks ago & started making a lot of noise. You don't hear the noise until you reach to about 10-15 miles & up. It's like almost a banging noise & it progresses with speed. It's hard to explain the noise through text, but if you can imagine, it's like a DOOM DOOM DOOM kind of noise. Also, as I turn right or left the noise progresses more as well. I changed the hub, which was worn down to NOTHING, and also the bearing & the whole spindle and I'm still hearing the same exact noise. Now, when I changed all of that stuff, the axle nut was loose cause the nut-lock & cotter pin was missing (I don't know). So I figured since the axle nut was loose, that wore down the hub really bad. So after I changed it I thought everything would be fixed, but I guess I was wrong. I put back a nut-lock & cotter pin. Does anyone have any ideas on what else it could be? I even tried changing out my wheels to see if it were a wheel problem, but no luck. It still made the noise with new wheels. If anyone has any ideas on what it could be, your help would be much appreciated. -Thank you for your time, Ryan |
 |
Replies
|
Mar 9, 2012 - 10:08 PM
|
|
 Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
your axle could be messed up as well
|
|
Mar 10, 2012 - 1:54 PM
|
|
|
Enthusiast Joined Dec 11, '07 From Davie, Florida Currently Offline Reputation: 4 (100%) |
QUOTE (mkernz22 @ Mar 9, 2012 - 11:08 PM)  your axle could be messed up as well Changed axel (sorry, I didn't mention that) and nothing has changed. Noise is still there Have not seen any leaks of any kind. Will double check, though.My end links LOOK fine, could there be an interior malfunction on the end link? I'll also have to check the ball joint as well. Thanks for the thoughts, I will let you guys know what I find. Until then, more ideas would be greatly appreciated. -Thanks again, Ryan |
Posts in this topic
str8thugginit4ya Banging noise! Mar 9, 2012 - 9:38 PM
block worn endlink? bad ball joint? check for leaks. Mar 9, 2012 - 9:52 PM trdproven when you changed the axle, what about the u-joint?... Mar 11, 2012 - 7:32 AM Bitter What did you torque the axle nut too?
What u-join... Mar 11, 2012 - 11:12 AM 808celica are you using the proper lug nuts and are they tor... Mar 11, 2012 - 12:08 PM mak5603 You check your rear engine mount? Probably not you... Mar 11, 2012 - 12:53 PM str8thugginit4ya Sorry for the late reply guys, I have a 94 GT w/ a... Mar 12, 2012 - 10:33 AM schmooot Are these new parts you are putting in? (hub/beari... Mar 12, 2012 - 9:55 PM
str8thugginit4ya QUOTE (schmooot @ Mar 12, 2012 - 10... Mar 13, 2012 - 1:15 PM Syaoran This is assuming the wheels are bigger than the co... Mar 13, 2012 - 3:00 PM str8thugginit4ya QUOTE (Syaoran @ Mar 13, 2012 - 3:00... Mar 15, 2012 - 4:33 PM str8thugginit4ya Ok, so sorry for taking so long with this. But I a... Mar 22, 2012 - 8:08 AM Bitter Differential is probably shot, maybe ran out of fl... Mar 23, 2012 - 8:37 PM str8thugginit4ya QUOTE (Bitter @ Mar 23, 2012 - 9:37 ... Mar 25, 2012 - 3:37 PM Syaoran If you're going to get another transmission, I... Mar 25, 2012 - 4:06 PM str8thugginit4ya QUOTE (Syaoran @ Mar 25, 2012 - 5:06... Mar 27, 2012 - 5:06 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 22nd, 2025 - 2:05 PM |