![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Nov 27, '09 From Canada Currently Offline Reputation: 4 (100%) ![]() |
My running light for the rear wont go on. When i step on the brakes they light up. I just changed the bulbs all are good, changed the fuse in the kick panel, changed the 3 amp fuse inside the rear panel. I dont know what else could be wrong with it. The wirings also look fine (no crunched or pinched ones.) Anyone know what else can be the issue? It's a 1994 GT-four. Any help would be much appreciated.
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 29, '09 From Prince George, BC CANADA EH! Currently Offline Reputation: 8 (100%) ![]() |
naw its easy.
Basically the fuses for the tail circuit are after the relay. So remove the fuses and make sure the input side of the fuse slot has 12V on it when you turn your lights on, if they don't then your relay is prob bad. But we can assume your relay is OK because you say your front markers work. Next is make sure you have power on the output side of all the fuses (I can't tell if there are 2 or 3 without going out to the shop and checking...and frankly I'm warm and just don't want to. Next remove the bulbs from the taillights and check for power inside the socket. Last step is make sure the ground is attached (back door center) edit: after a closer look at the diagram the only way that your fronts would work and not your backs is if that one connector right in the middle was unplugged. Labelled 5 1F. lemme look and see where it is -------------------- ST205 Crew represent
![]() Challenge Accepted |
![]() ![]() |
Lo-Fi Version | Time is now: August 20th, 2025 - 5:27 AM |