Mar 12, 2012 - 9:15 PM
|
|
|
Enthusiast Joined May 9, '11 Currently Offline Reputation: 0 (0%) |
Hi guys, I own a 7AFE 1996 1.8 ST
My rear hand brake is too high and my rear brakes are starting to give me crap.. it looks rusty and old.. Time for a re-build! So my question, what rear brakes are available for me? I'm after more upgrade then stock... Size? Just any info so I don't get the wrong stuff Thanks |
![]() |
Mar 14, 2012 - 12:15 PM
|
|
![]() Enthusiast ![]() Joined Sep 1, '10 From Toronto Currently Offline Reputation: 3 (100%) |
probably a dumb question. if you switch from drums to rotors in the rear... will the ebrake shoes still fit and work with the rotor?
|
Mar 14, 2012 - 12:18 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
|
Mar 14, 2012 - 12:50 PM
|
|
![]() Enthusiast ![]() Joined Sep 1, '10 From Toronto Currently Offline Reputation: 3 (100%) |
probably a dumb question. if you switch from drums to rotors in the rear... will the ebrake shoes still fit and work with the rotor? I don't believe so. & You shouldn't reuse old pads when upgrading to a different setup good to know... so im assuming there would be no use for the ebrake anymore. just leave the car in gear when parking.... that's what im doing atm anyways. |
revelsumgt Brake upgrade options? Mar 12, 2012 - 9:15 PM
SwissFerdi Go to Tire Rack's site and enter your vehicle ... Mar 12, 2012 - 9:26 PM
cheela yeah get rid of the drums and switch to rotors.
I ... Mar 13, 2012 - 2:04 AM
Tigawoods i second brembo blanks. but i am for EBC pads Mar 13, 2012 - 7:19 AM
revelsumgt Thanks for all your replys
I am 100% switching to... Mar 13, 2012 - 6:59 PM
SwissFerdi QUOTE (revelsumgt @ Mar 13, 2012 - 7... Mar 14, 2012 - 9:20 AM
revelsumgt Hang on, so i will not be able to use my hand brak... Mar 14, 2012 - 1:59 PM
RabidTRD QUOTE (revelsumgt @ Mar 14, 2012 - 2... Mar 14, 2012 - 5:01 PM
Galcobar Toyota uses a drum-in-disc setup to provide an eme... Mar 14, 2012 - 10:52 PM
SwissFerdi ^ That's proper information right there. Thank... Mar 20, 2012 - 9:20 AM![]() ![]() |
| Lo-Fi Version | Time is now: March 19th, 2026 - 1:52 PM |