 Gen III o2 sensor replacement? |
 Mar 13, 2012 - 4:23 PM
|
 
|
 Enthusiast  Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%)  |
I've been calling around about the stock o2 sensor in the Gen III 3sgte. I can't get anyone to cross reference the numbers I pulled from the parts reference list, so it looks like it's not available on any other toyota's produced in the US unless it's under a different part number. Toyota uses the same flange-style o2 sensor on the 5sfe, and there is also the link below from ebay. I'm running an Autronic EMS in my celica, so I can connect any o2 sensor. The holes to bolt it in are elongated, anyone know if this one will work? Or if any of the universal bungs on ebay will work. Since it is cheap, my only concern is it warping from the heat. Since I have the autronic, I can run a 4 wire heated o2 sensor instead of the stock two wire one, so I would like to go with the bung option. Anyone know if it fits?
o2 sensor on ebay for 5sfe or something like this maybe bung adapter -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
 |
Replies
|
Mar 14, 2012 - 5:41 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
QUOTE (match220 @ Mar 13, 2012 - 5:23 PM)  I've been calling around about the stock o2 sensor in the Gen III 3sgte. I can't get anyone to cross reference the numbers I pulled from the parts reference list, so it looks like it's not available on any other toyota's produced in the US unless it's under a different part number. Toyota uses the same flange-style o2 sensor on the 5sfe, and there is also the link below from ebay. I'm running an Autronic EMS in my celica, so I can connect any o2 sensor. The holes to bolt it in are elongated, anyone know if this one will work? Or if any of the universal bungs on ebay will work. Since it is cheap, my only concern is it warping from the heat. Since I have the autronic, I can run a 4 wire heated o2 sensor instead of the stock two wire one, so I would like to go with the bung option. Anyone know if it fits? o2 sensor on ebay for 5sfe or something like this maybe bung adapter you can get one from a 93 alltrac. they are the same. but since your on a standalone, i would go 2 wire and save $. -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Mar 14, 2012 - 2:12 PM
|
|
|
Enthusiast Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%) |
QUOTE (presure2 @ Mar 14, 2012 - 12:41 AM) you can get one from a 93 alltrac. they are the same. but since your on a standalone, i would go 2 wire and save $. That's good to know, I'll just go with a 4 wire though. I can get the bung adapter to adapt to the screw in style o2 sensors for under $10 and a cheap universal o2 sensor would be about $30. Unless I can get a universal o2 sensor with 4 wires that has the flange on it to fit the car. -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
Posts in this topic
match220 Gen III o2 sensor replacement? Mar 13, 2012 - 4:23 PM
match220 plus I just got back from looking at the o2 sensor... Mar 13, 2012 - 5:30 PM Neon90424 for 120$ you can buy a UEGO wideband gauge th... Mar 13, 2012 - 10:13 PM
match220 QUOTE (Neon90424 @ Mar 13, 2012 - 5... Mar 14, 2012 - 1:03 AM match220 Just picked up the 4-wire o2 sensor. Denso brand, ... Mar 15, 2012 - 6:47 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 29th, 2026 - 4:45 PM |