 Engine Stand Bolts, ... frick, what size do I need?? |
 Feb 27, 2012 - 6:55 PM
|
 
|
 Enthusiast  Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%)  |
I just realized that I need to pick up some bolts in order to mount my engine to my new engine stand I just bought.
Any ideas the size of bolts I need to pick up? (I'm obviously going to get grade 8 bolts, and I think they need to be course/fine thread, and maybe 3 1/2" in length - but diameter I'm not sure of) Halp?  Hoping to mount the block on the flywheel side of the engine... (like normal) 
This post has been edited by KAOS: Feb 27, 2012 - 6:56 PM -------------------- |
 |
Replies
|
Feb 27, 2012 - 9:28 PM
|
|
|
Enthusiast Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%) |
3/8''-16 x 3-1/2'' - should do the trick.
Sounds about right. Thanks bsamps4! -------------------- |
|
Mar 14, 2012 - 8:25 PM
|
|
 Enthusiast Joined Jul 7, '03 Currently Offline Reputation: 55 (100%) |
QUOTE (KAOS @ Feb 27, 2012 - 7:28 PM)  3/8''-16 x 3-1/2'' - should do the trick. Sounds about right. Thanks bsamps4! ? shouldn't it be metric? if it is close to a 3/8- 16 it is probably a 10mm 1.5 to clarify the 10mm probably has a 17mm head. A 3/8 -16 may actually thread in a ways but it is a smaller diameter with a different thread pitch so you could damage the block threads if you use those. This post has been edited by 97lestyousay: Mar 14, 2012 - 8:51 PM -------------------- JDM guy made me do it.
|
Posts in this topic
KAOS Engine Stand Bolts Feb 27, 2012 - 6:55 PM
bsamps4 QUOTE (KAOS @ Feb 27, 2012 - 6:55 PM... Feb 27, 2012 - 7:30 PM
KAOS Actually Randy; you're right about it being me... Mar 14, 2012 - 8:50 PM
97lestyousay yeah 17mm head sounds more like a 12mm. Mar 14, 2012 - 8:55 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 3:01 PM |