6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3SGTE not starting.
post Mar 14, 2012 - 6:59 PM
+Quote Post
Soulend



Enthusiast
***
Joined Nov 24, '07
From Tucson, Az
Currently Offline

Reputation: 2 (100%)




Hey everyone, so I am completely stumped now.

after fixing all my major oil water and timing problems, I go to start the car, and it just turns and turns and turns but doesn't actually run... I know my timing is correct.

I've changed the coil wire out, the distro cap, and igniter. just to see if those could cause the problem. I test for spark and fuel, both are fine. I even put fuel into the intake and still nothing.

also, I am sure I only unplugged the radiator. It would start like two weeks ago... I don't get it.

does anyone have any Ideas? frown.gif I just want to get my car running again...

Kevin

This post has been edited by Soulend: Mar 14, 2012 - 7:07 PM
 
Start new topic
Replies
post Mar 15, 2012 - 7:45 AM
+Quote Post
Bitter

Enthusiast
*****
Joined Mar 11, '06
From Way South Chicago
Currently Offline

Reputation: 0 (0%)




SO you have spark, you have injector power and ground pulse and fuel pressure, and the engine has compression?


--------------------
post Mar 15, 2012 - 6:23 PM
+Quote Post
Soulend



Enthusiast
***
Joined Nov 24, '07
From Tucson, Az
Currently Offline

Reputation: 2 (100%)




QUOTE (Bitter @ Mar 15, 2012 - 5:45 AM) *
SO you have spark, you have injector power and ground pulse and fuel pressure, and the engine has compression?

yes yes and yes.

my dad mentioned the spark might be weak... but it still has spark at the plug.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 14th, 2025 - 11:52 PM