![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Nov 24, '07 From Tucson, Az Currently Offline Reputation: 2 (100%) ![]() |
Hey everyone, so I am completely stumped now.
after fixing all my major oil water and timing problems, I go to start the car, and it just turns and turns and turns but doesn't actually run... I know my timing is correct. I've changed the coil wire out, the distro cap, and igniter. just to see if those could cause the problem. I test for spark and fuel, both are fine. I even put fuel into the intake and still nothing. also, I am sure I only unplugged the radiator. It would start like two weeks ago... I don't get it. does anyone have any Ideas? ![]() Kevin This post has been edited by Soulend: Mar 14, 2012 - 7:07 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Nov 24, '07 From Tucson, Az Currently Offline Reputation: 2 (100%) ![]() |
Whelp, redid the timing, it wasn't 180 out I think one of the cams jumped when the tensioner was release or something because it was like 20-ish degrees past 0.
Thanks for the help. I honestly didn't want to redo the timing belt. but its really on now. Thanks again, Kevin |
![]() ![]() |
Lo-Fi Version | Time is now: July 19th, 2025 - 9:35 AM |