![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) ![]() |
Does anyone know what size brake lines we have?
I think it's somewhere around 1/8 or 1/4 of an inch. My rear drivers side line pretty much blew so I'm thinking about just patching it for now. This summer I want to run the rear lines through the car and out through the grommets where the abs wires would go. I converted to non-abs so I don't need those wires anymore. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) ![]() |
Does anyone know what size brake lines we have? I think it's somewhere around 1/8 or 1/4 of an inch. My rear drivers side line pretty much blew so I'm thinking about just patching it for now. This summer I want to run the rear lines through the car and out through the grommets where the abs wires would go. I converted to non-abs so I don't need those wires anymore. I would not try to patch , I had a brake line that was rubbing and I found it just in time. Here are some cheep ok lines for a 2.2 they may be same as 1.8 if that is what u drive. U will have to scroll to toyota/celica/so on it won't save the exact page. Also spray wd 40 on the connections before attempting to loosen. http://www.rockauto.com/catalog/raframecatalog.php This post has been edited by xrav22: Mar 31, 2012 - 11:41 AM |
![]() ![]() |
Lo-Fi Version | Time is now: August 22nd, 2025 - 7:10 PM |