![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Nov 18, '10 From montreal Currently Offline Reputation: 0 (0%) ![]() |
i was on the street yester day and its starting smelling burn , and i heard a noise like `>ping> and the clutch stop working,
so i drove the car in 2nd gear to home, at neutral: if i push the clucht, -feel loose, but the pedal come back -when i push the clutch , the rpm goes downs and almost shut down the engine, what happen ? do i have to get a new clutch or a new cylinder clucht? do i have to open the tranny? thanks This post has been edited by Needles: May 9, 2012 - 6:32 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Nov 18, '10 From montreal Currently Offline Reputation: 0 (0%) ![]() |
srry for long time no reply,
i just think ist the clutch bearing that burn up, because when i swapped, (i have 3sgte and mr2 tranny) i forgot to put grease on the bearing, after i changed my thermosthat and for the first time since my swap, the engine get heat (up to normal temp, ) and the bearing just burn two day after, cause no grease into it, i think its what happend, and now need to remove the transmission and change the bearing no leak from clutch master This post has been edited by Needles: Apr 23, 2012 - 7:28 PM |
![]() ![]() |
Lo-Fi Version | Time is now: June 28th, 2025 - 1:55 PM |