![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Apr 6, '12 From trenton Currently Offline Reputation: 1 (100%) ![]() |
installed trd springs on monroe oe spec struts with new mounts frt and rear frt is great no noise from the rear over bumps it make a knock noise reinstalled the oem mounts noise got a little less pronounced. When jacking the car up i noticed lots of play on the coil spring are the oe spec struts not allowing the springs to seat properly in the rear? any help would be great
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 6, '08 From Lisarow, NSW, Australia Currently Offline Reputation: 0 (0%) ![]() |
Thats weird! you sure the monroe struts are the same size, TRD springs are not much lower than stock so should be a snug fit. Bump stops won't make noises they just stop the car from bottoming out, Id put money on it that its something related to the spring moving, defs have the the 2 rubbers on each spring end, bit inbetween strut mount and bearing? I forget how the rear was setup.
|
![]() ![]() |
Lo-Fi Version | Time is now: August 24th, 2025 - 3:55 PM |