![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Aug 29, '02 From Lake Orion, MI Currently Offline Reputation: 6 (100%) ![]() |
I need:
* 5SFE distributor (The one with the Coil inside / Pre OBDII) * Hubs in good conditions * a pair of knuckles - Condition of ball joint is not important * The coolant pipe with all the sensors attached to it. * 5SFE / Celica GT Drivers and Passenger Half Shafts (Original Toyota Equipment Only) * Drivers and Passenger Front Fenders as well the supporting sheet metal that sits under the headlights * Under Engine protective plastic Thanks for everyone's support! This post has been edited by qatar11: Apr 27, 2012 - 3:29 PM -------------------- -Mike
mjcoury@gmail.com Team Reynolds Style Celica Blog Celica Wiki It will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 20, '09 From Winnipeg Currently Offline Reputation: 5 (100%) ![]() |
I have a complete front axle, Passenger side from a gt.
It is used, but was still in good condition when I took it out. Wasn't clunking or leaking. Took it out because a shop told me it was making a clunk, so I replaced it, and it turned out that the noise wasn't from the axle but from something else. -------------------- -Protection mode, For when your amp tries to blow its load. 1995 Toyota Celica GTS - Daily Driver 1999 Chevy Cavalier - Winter Beater 1994 Honda Civic CX Hatchback - Dead My Celica! |
![]() ![]() |
Lo-Fi Version | Time is now: August 20th, 2025 - 6:58 PM |