Keyless Entry System, Adapting Ford's Keyless Entry System to my 6GC Options

[Special_Edy]

Ok, so there are two 97 Lincoln Town Cars in my driveway and I have to admit I've fallen in love with the keyless entry keypad above the door handle. I had to replace one of the keypads and a window regulator, and while I had the door apart I realized how easy it would be to swap this system into another vehicle.
I have an aftermarket immobilizer in my 94 GT and I plan on wiring the keyless entry into it. So far I have a spare module for it that goes into the driver door and a keypad with a bad button(no big deal they are $10). I will need to find a very specific wiring diagram for the keyless entry system(not to mention the Toyota), and the door wiring harness from a Lincoln towncar.





Spare Keypad, 1-2 button doesnt work but I can get them at the salvage yard for $10




Driver door Keyless Entry Module, stores 5 codes. cost $35 at the junkyard.





So so far my total starting out for this project is $35, Ill make sure to keep you posted.
Lemme know what you think!!!

[richee3]

I did enjoy having that system on our old Exploder, but there's no way I could justify ruining the Celica's lines or cutting a hole in the door for that. Find a good place to hide it yet still have it accessible and I'm all for it Bottom of the mirror, perhaps? Have to go by feel but keeps it out of sight.