6G Celicas Forums

Welcome Guest ( Log In | Register )

> Keyless Entry System, Adapting Ford's Keyless Entry System to my 6GC
post May 1, 2012 - 4:33 PM
+Quote Post
Special_Edy



Enthusiast
****
Joined Oct 29, '11
From Haltom City, Texas
Currently Offline

Reputation: 1 (100%)




Ok, so there are two 97 Lincoln Town Cars in my driveway and I have to admit I've fallen in love with the keyless entry keypad above the door handle. I had to replace one of the keypads and a window regulator, and while I had the door apart I realized how easy it would be to swap this system into another vehicle.
I have an aftermarket immobilizer in my 94 GT and I plan on wiring the keyless entry into it. So far I have a spare module for it that goes into the driver door and a keypad with a bad button(no big deal they are $10). I will need to find a very specific wiring diagram for the keyless entry system(not to mention the Toyota), and the door wiring harness from a Lincoln towncar.





Spare Keypad, 1-2 button doesnt work but I can get them at the salvage yard for $10




Driver door Keyless Entry Module, stores 5 codes. cost $35 at the junkyard.





So so far my total starting out for this project is $35, Ill make sure to keep you posted.
Lemme know what you think!!!
 
Start new topic
Replies
post May 1, 2012 - 6:31 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




You could try the Exploder pad with the flat black plastic:



--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 20th, 2025 - 10:33 AM