![]() |
![]() |
![]() |
|
Enthusiast Joined May 10, '12 From Las Vegas Currently Offline Reputation: 0 (0%) ![]() |
Hi there!
![]() 1. Is it a good deal? 2. If I do get this car, would swapping out the motor be easier/cheaper than rebuilding it? 3. Any things I should make sure to check when I go look at the car tomorrow? Thanks! |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) ![]() |
For you, the ONLY swap to even try and consider would be the BEAMS.... but again... thats 2k if you're lucky just for the motor....
Find a 5s that is OBD1.... buy that used.... don't change anything on that motor because it's indestructible, and put that motor in. You don't want to tear the motor down if this is your first car. I can find running 5s blocks for under 1000.... freshly rebuilt for 2-3k.... but you don't even need that (rebuilt i mean) The 5s is a workhorse and will take most anything you can throw at it. if you find a cheap 5sfe , used, with up to and including 150k miles.... buy it and put it in. My .02. Make sure it was running when pulled though.... gotta be careful... but that is the cheapest way out. This post has been edited by ricochet1490: May 15, 2012 - 9:43 AM -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 11:04 PM |