 5sfe headers missing nuts and bolts?, Need a picture |
 May 21, 2012 - 5:16 PM
|
 
|
 Enthusiast  Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%)  |
Hey. Can anyone shoot me a pic of their 5sfe stock headers because as I was flushing my coolant I noticed that to the far left. There was a nut missing and to the far right there was no nut or bolt but a hole? Or let me know if there are suppose to be bolts and nuts there and if so, where can I get them?
It's a 1997 Celica GT. 
This post has been edited by ILoveMySilly97: May 21, 2012 - 5:18 PM -------------------- |
 |
Replies
|
May 22, 2012 - 1:24 AM
|
|
 Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
Agree, there should be nuts on both spots and studs. BTW, Fram is the worse oil filter known to man.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
|
May 22, 2012 - 2:33 AM
|
|
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
QUOTE (trdproven @ May 22, 2012 - 1:24 AM)  Agree, there should be nuts on both spots and studs. BTW, Fram is the worse oil filter known to man. So...............where can I get the stud? Yea I know it's not a good filter but I needed to do an oil change and full tune up with limited money. I spent all the money on the good stuff like my ngk spark plugs and wires. Hahaha. -------------------- |
Posts in this topic
ILoveMySilly97 5sfe headers missing nuts and bolts? May 21, 2012 - 5:16 PM
mkernz22 Yeah, there should be one in both of those spots May 21, 2012 - 6:11 PM Syaoran If there are no exhaust leaks there's nothing ... May 21, 2012 - 6:11 PM
ILoveMySilly97 QUOTE (Syaoran @ May 21, 2012 - 6:11... May 22, 2012 - 2:36 AM Smaay just replace the CAT that should solve your proble... May 22, 2012 - 10:50 AM ILoveMySilly97 QUOTE (Smaay @ May 22, 2012 - 11:50 ... May 22, 2012 - 1:07 PM trdproven If you can't find a stud to go in there, you c... May 22, 2012 - 7:27 PM ILoveMySilly97 QUOTE (trdproven @ May 22, 2012 - 8... May 23, 2012 - 12:48 AM Smaay its actually a 10mm X 1.25 bolt with a 14mm head o... May 23, 2012 - 9:01 AM trdproven should be fine with a bolt, just use a six point s... May 23, 2012 - 5:45 PM ILoveMySilly97 Yea. I'm going to have to drive down the stree... May 24, 2012 - 12:41 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 11th, 2026 - 10:56 PM |