![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) ![]() |
What sway bar bushing for the rear is similar to our 17mm Celica? Its so hard to find the rear sway bar bushings these days locally and sometimes online without having to get like energy suspension ones that come with the bracket. any cars similar bushing?
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) ![]() |
thanks spider, that looks great, I appreciate the time you took.
I'm sure some where down the line, me or you will make some kind of official sticky for it. ![]() for now, this serves as really good info and comparison. **Why do you say you would want to use the OEM brackets over the ES ones? This post has been edited by trdproven: May 31, 2012 - 5:02 PM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 17, '08 From JB MDL, NJ Currently Offline Reputation: 30 (100%) ![]() |
thanks spider, that looks great, I appreciate the time you took. I'm sure some where down the line, me or you will make some kind of official sticky for it. ![]() for now, this serves as really good info and comparison. **Why do you say you would want to use the OEM brackets over the ES ones? Thanks for the kudos....i used the oem cause of the height difference in mounting. You can use E.S. brackets but you'll have to modify them or force them on. Between the two there is not much difference for it to be a concern to me, personally. |
![]() ![]() |
Lo-Fi Version | Time is now: September 21st, 2025 - 8:58 PM |