![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 10, '03 From South Central Los Angeles Currently Offline Reputation: 0 (0%) ![]() |
I'm getting my exhaust piping done on Saturday. I went to the guy who's gonna do it for me, and we lifted the car to see exactly how "I" want the piping to run.
My thing is that i want the piping as straight as possible eliminating all those curves and turns. It's going to be a 3" piping and in order for it to be the way i want it, it would have to run under a lil section of the gas tank. So here's the question. Do you people think it's safe enough to run it under the tank like that or not. Or is there something that i can do to restrict so much heat under the tank that i can still run it that way? This post has been edited by sphinx_race911: Feb 18, 2004 - 11:48 AM |
![]() |
![]() |
|
||
![]() Enthusiast ![]() Joined Apr 3, '03 From Omaha, Ne Currently Offline Reputation: 0 (0%) ![]() |
Its not the only way you can run it I have 2.5 in piping and mine does not go over the rear suspension. I don't know how they did it but I have only one bend in my cat back. and that is right off of the cat, it curves about 45 degress and goes straigh back to the stock muffler location. |
||
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 6:26 AM |