Passenger CV half shaft, input would be apperciated Options

[AuffyZ]

Ok i'm going to be replacing my half shaft in the next couple of day and i was wondering where a good place to go online that has step by step instructions to refer back to incase i get stuck!

Any help will be apperciated! Thankyou

[BonzaiCelica]

if you don't have an impact gun. use a 24" breaker bar. they usually cost about $24 and have lifetime warranty. haha I broke one trying to get an axle nut of a v6 infiniti i30. then you can just return it right after.

yea about that c clip. Use one flathead screw driver. Once you shove it under the c clip. tap the screw driver with a hammer in a clockwise position. The same thing you do when removing the tire on a bicycle rim. you also might have to hammer the bracket off the bearing after you take off the Snap Ring correct term(the C-clip). Take some wd40 and hit it where the two bolts attach to slowly but surely it'll come loose.