"The Big 3", Question? Options

[caribou17]

So i have done some reading about doing "the big 3", Anyways, I got my Celica a few weeks ago the wiring was already done. I did not realize the previous owner had already attempted the big 3. Well he did finish, BUT the wire is 16 gauge. So that defeats the purpose of doing it does it not? Should i just replace the wires with 2G wire or 4? And what exactly are the benefits of doing this, just more power?

[caribou17]

Use 4-2gauge wire. A GOOD, quality wire is welding cable. 1/0 is cheap and will be more than enough even for an upgraded alternator. A fuse holder, about 10-12 feet of wire, and 100 amp ANL fuse and good,tight crimp connections.




Wire #1: Alternator+ to Battery+ (FUSED)
Wire #2: Battery- to Chassis
Wire #3: Engine to Chassis

The idea of doing this is to have free-flowing current. The bigger the wire, the better. 8 gauge is small. Factory is around 8 gauge so you'd just be replacing the factory wiring.

Remember current, like fluids, flow down the path of least resistance. If you have an old, corroded 8 gauge wire and put in new 8 gauge, most likely it'll flow down the new one. It won't spread throughout both wires, it'll just travel down one. So use a minimum of 4 AWG.

Knukonceptz has the best wire for the money. (audio wire)

Welding cable is the best, and it's got a strong jacket made to withstand heat and abrasives, overall a harsh environment.

I just searched up Knukonceptz the prices aren't bad at all if its quality and will last, I see that they just started shipping to Canada to so thats good for me! I think ill place an order sometime soon hopefully. Thanks for the explanation all this is so helpful!

Agreed knuconceptz has some great wire that "pretty cheap" and 16 gauge wire doesn't make annnnyyyy sense, maybe its like 12? 16 would just melt, surprised it hasn't yet
And fuses do not go on the negative side, like again doesn't make any sense at all lol.
Most systems you really don't need more than a 4g wire. You can have more, won't hurt anything. But unless you have (and i forget the actual numbers) like 2500+ watts you don't need anything larger.
An not to get into a big discussion, but cheap amps that put out 2500W+ are not real putting that out. Theres a reason name brands cost more. because they don't lie as much lol. watts is not how much sound there is

It said 16 gauge right on it thats the only reason i know haha, Yea after reading about doing this and looking at how small the wires were i was surprised and pretty confused, I'm glad i got it all figured out now though., Thanks for the reply!