Jul 5, 2012 - 12:23 PM
|
|
|
Enthusiast ![]() Joined Mar 28, '05 From California Currently Offline Reputation: 0 (0%) |
driving home from work, im 4 blocks from house when i get to a stop sign. when i go again my motor stops and when i try to start it up only the starter is heard which brings me to conclusion that when i open the hood the timing belt snapped. i read that the 5a-fe are non- interference motors and after the belt snaps it kills the motor to prevent damage to the internals. is this true and of course i will check the inside... im just looking for relevance and good hopes!!
This post has been edited by pnoywitmustrdsauce: Jul 5, 2012 - 12:58 PM |
![]() |
Jul 8, 2012 - 1:09 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
Spin the crank around again and recheck that they are still at 0.
Lining them up once is not enough. There can be slack in the belt that will cause them to look ok when first installed but be totally off after a few revolutions. I had to redo the belt on my 3sgte at least 4 times before I got everything lined up correctly. Your 5s will be easier but you should still check it again. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
pnoywitmustrdsauce timing belt broke in just 2 years Jul 5, 2012 - 12:23 PM
enderswift they are not interference motors. What brand of be... Jul 5, 2012 - 12:34 PM
pnoywitmustrdsauce QUOTE (enderswift @ Jul 5, 2012 - 10... Jul 5, 2012 - 12:59 PM
KAOS The 5SFE is NON-Interference. Meaning yes, when th... Jul 5, 2012 - 12:41 PM
Special_Edy Yeah the 5SFE is a Non-Interference meaning that t... Jul 5, 2012 - 12:43 PM
pnoywitmustrdsauce thanks for the reply, needed the positive news Jul 5, 2012 - 12:49 PM
Bitter What else did you change with the belt? Jul 5, 2012 - 6:43 PM
michlowrider Just becareful if you are replacing it your self, ... Jul 5, 2012 - 11:39 PM
Special_Edy QUOTE (michlowrider @ Jul 6, 2012 - 12... Jul 6, 2012 - 1:28 PM
michlowrider QUOTE (Special_Edy @ Jul 6, 2012 - 1... Jul 6, 2012 - 2:24 PM
Special_Edy Well for me I've had the timing belt off my 5s... Jul 6, 2012 - 6:52 PM
Special_Edy Oh and definately think about changing the cranksh... Jul 6, 2012 - 7:16 PM
pnoywitmustrdsauce QUOTE (Special_Edy @ Jul 6, 2012 - 5... Jul 7, 2012 - 10:54 PM
michlowrider I concur Doctor!
Of course while your in there... Jul 6, 2012 - 9:57 PM
pnoywitmustrdsauce update: brand new timing belt installed...nothing ... Jul 7, 2012 - 6:17 PM
richee3 Sounds like one of the cams might be off by a toot... Jul 7, 2012 - 6:21 PM
pnoywitmustrdsauce QUOTE (lagos @ Jul 8, 2012 - 11:09 A... Jul 8, 2012 - 5:41 PM
Special_Edy Remove the upper timing cover and keep the lower o... Jul 9, 2012 - 1:19 AM
trdproven doublecheck if your belt snapped or jumped but you... Jul 9, 2012 - 7:50 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 16th, 2025 - 3:20 PM |