 Camber Bolts |
 Jul 8, 2012 - 3:37 PM
|
 
|
 Enthusiast Joined Jan 12, '12 From Philly Currently Offline Reputation: 0 (0%)  |
Im thinking about getting some camber bolts. but was wondering how hard it would be to install and if there is a "how-to" guide for installing them
|
 |
Replies
|
Jul 9, 2012 - 3:06 AM
|
|
 Enthusiast  Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
its pretty simple, most macpherson struts like ours use the same type of camber bolts, especially alot during the mid 90's toyotas. Face the tab toward you to adjust for positive camber, and face it towards the car for negative. its good to have a magnetic camber gauge or those pro ones but i guess you can eyeball it as close as you can to OEM. Just remember OEM specs are not exactly 0 degree there is some degree of camber, and I believe the rears have more camber than the front.
if you have front camber plates on coilovers, you just need to buy camber bolts for the rear. This post has been edited by trdproven: Jul 9, 2012 - 3:07 AM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Posts in this topic
LALA-shark Camber Bolts Jul 8, 2012 - 3:37 PM
njccmd2002 http://www.6gc.net/forums/index.php?showto...4... Jul 8, 2012 - 4:04 PM diegohiga very simple
http://www.youtube.com/watch?v=8Sr6rc3... Jul 8, 2012 - 4:12 PM Tigawoods I have camber plates on my ksport fronts, but when... Jul 9, 2012 - 7:34 AM
mak5603 QUOTE (Tigawoods @ Jul 9, 2012 - 5:3... Jul 9, 2012 - 1:56 PM lagos QUOTE (Tigawoods @ Jul 9, 2012 - 8:3... Jul 9, 2012 - 7:40 AM Tigawoods it is aligned!!!!!! Jul 9, 2012 - 7:41 AM Tigawoods increase toe when camber is changed? Jul 9, 2012 - 2:30 PM mak5603 Yeah.
Edit: I noticed you said going negative. I ... Jul 9, 2012 - 4:49 PM Tigawoods toe in an out shouldnt change as extremely, if at ... Jul 9, 2012 - 6:28 PM mak5603 QUOTE (Tigawoods @ Jul 9, 2012 - 4:2... Jul 9, 2012 - 6:46 PM trdproven QUOTE (Tigawoods @ Jul 9, 2012 - 10... Jul 9, 2012 - 7:56 PM Tigawoods it was VERY noticeable. I tried to drive it out bu... Jul 9, 2012 - 9:33 PM trdproven thats actually what I would do... Jul 9, 2012 - 10:09 PM diegohiga So our only solution to correct camber are these b... Jul 10, 2012 - 6:32 PM Tigawoods my rear camber can be adjusted via the top mounts,... Jul 10, 2012 - 7:44 PM trdproven there are camber bolts with more degree adjustment... Jul 10, 2012 - 10:36 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 8:13 PM |