![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) ![]() |
I apologize if this info is somewhere else, I searched and could not locate what I needed.
I am taking a 3rd gen 3S out of a 97' (ST ODB2) celica and putting it into my 94' (GT ODB1) celica. I have swapped a 3S into a 94' before, but not a 3rd gen and not into a ODB2 car. Is there any differences in wiring in the engine to an ODB2 car vice the ODB1 car? Will I need to rewire anything or will this be plug and play? Thanks! ![]() This... ![]() In to this.... ![]() This post has been edited by jcbass7: Jul 13, 2012 - 2:04 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) ![]() |
yup. My '99 st204 has a white/black wire at the pin 12 location, but the 3sgte harness needs a wire coming from the aux relay box in that spot. Luckily there is no problem with unpinning that white/black wire since it is only a ground. I posted a few photos in my swap thread if you need a better look, you can see the wire I'm talking about in one of the pictures:
http://www.6gc.net/forums/index.php?showto...mp;#entry974364 -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: June 1st, 2025 - 7:40 PM |