Turn signal question Options

[flavorjunction]

Hey guys, my 96 ST turn signal has a rapid clicking sound, but I checked the bulb and it was good (I just replaced all the bulbs) and the only problem I see is that the wires leading to the bulb had been cut (on accident?) and retied off with electrical tape. The passenger side looks the same, but they function perfectly.

Could it be the wiring that is bad? The two cut wires are a green and white one and a solid green one.

It was working fine a couple days ago, but I don't know what could have happened in a span of two days to cause the issue.

TL;DR: turn signal (driver) won't work, replaced bulb, wires had previously been cut but tied off with electrical tape. Passenger side works and it was also cut/tied off as well.

Thanks for any input!

[trdproven]

didnt really understand...but are you saying all the turn signals all 4 work correctly, but the only problem is that you are getting the fast flashing lights from the cluster, which acts like one of the bulbs are burnt but they are actually good? a bad bulb can make the cluster signal fast.