Turn signal question Options

[flavorjunction]

Hey guys, my 96 ST turn signal has a rapid clicking sound, but I checked the bulb and it was good (I just replaced all the bulbs) and the only problem I see is that the wires leading to the bulb had been cut (on accident?) and retied off with electrical tape. The passenger side looks the same, but they function perfectly.

Could it be the wiring that is bad? The two cut wires are a green and white one and a solid green one.

It was working fine a couple days ago, but I don't know what could have happened in a span of two days to cause the issue.

TL;DR: turn signal (driver) won't work, replaced bulb, wires had previously been cut but tied off with electrical tape. Passenger side works and it was also cut/tied off as well.

Thanks for any input!

[Timmyface]

^ to add to that. When one of my turn signals blew, the signal inside the car clicked alot faster than usual.
This also done this when i added a certain LED if i remember correctly.

Basically, the fast clicking sound is telling you that one of your bulbs on the outside of the car isnt working properly.
Try to get all of them working, including the ones that were cut, so your fronts, sides and rears, and make sure they are standard bulbs too