6G Celicas Forums

Welcome Guest ( Log In | Register )

> gauges have no light, fixed problem
post Jul 18, 2012 - 11:05 PM
+Quote Post
toyota123

Enthusiast
**
Joined Jan 13, '12
From Georgia
Currently Offline

Reputation: 3 (100%)




So after a few months of browsing through this wonderful forum, while searching for my car, I got a 97 GT Hatch. So I have been getting it back on the road. New struts and brakes all the way around and was installing a new set of reverse glow gauges. Anyway I got the new gauges working correctly but now I have no lights for the needles. After searching I found that all the other lights work door adjar seatbelt etc but no needles even after installing some LEDs that I got from AutoZone. Am I up a creek? Do I need to go to a junk yard and get a new cluster than switch over the Speedo so mileage is still accurate. Any help will greatly appreciated also.I checked all fuses and everything else appears to be functioning correctly

This post has been edited by toyota123: Jul 20, 2012 - 8:05 AM


--------------------
97 Celica GT liftback DD/ project
96 corolla back up DD
 
Start new topic
Replies
post Jul 19, 2012 - 10:56 AM
+Quote Post
Nihil



Enthusiast
**
Joined Jul 17, '12
From Slovenia
Currently Offline

Reputation: 0 (0%)




If everything is exactly the same, I'd suggest that you replace just the circuit. Remove all the bulbs, unscrew everything and it should come right off. This way you keep the milage reading and clusters/gauges exactly the same.

Then just put all the bulbs back in and test each and every one. Except for the fuel level indicator, this should be rather easy.

This post has been edited by Nihil: Jul 19, 2012 - 10:58 AM


--------------------

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 27th, 2025 - 2:18 PM