Feb 20, 2004 - 4:43 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Oct 22, '03 Currently Offline Reputation: 0 (0%) |
Dammit!! First I find out i need new struts, then i ruin my turn signals trying to clear them out, next....My clutch starts to stick. What is going on? Has this happened to anyone??
I was at a light, I shift to first as soon as it turns green and my clutch wont disengage. It stays sunk in the whole way. So im stuck in first goin 5-10 mph and pull over. I hit my breaks till i come to a complete stop and my car stalls. I stick my hand down and yank the clutch back up. I proceed to drive a gain and i get stuck in first gear again. Same process. Instead of taking off in first, i take off in second. Everything seems fine. I shift to third, fourth and so on. The problem comes when i try and start from first gear. I feel the clutch got stickier throughout the rest of the gears. Any recomendations? Where can i start?? I need your help guys and gals. |
![]() |
Feb 21, 2004 - 4:23 AM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Sep 22, '02 From Detroit Currently Offline Reputation: 0 (0%) |
If it's sticking in gear, the clutch isn't the problem. It's more than likely the clutch master cylinder. Especially from the description you gave about having to pull up the pedal(the pedal staying on the floor). I'd say a new cylinder and your good to go. Won't be too cheap, but it's cheaper than a clutch.
|
LatinKraze My clutch sticks.... Feb 20, 2004 - 4:43 PM
Uppitycracker Only happens in first? I would consider your trann... Feb 20, 2004 - 4:47 PM
LatinKraze I guess imma take it to the mechanic tomorrow. Any... Feb 20, 2004 - 6:35 PM
LatinKraze I talked to a few of my friends...sounds like i ne... Feb 20, 2004 - 8:20 PM
Cody If it's sticking, maybe something's wrong ... Feb 20, 2004 - 10:21 PM
stelica85 had the exact same problem and i just replaced the... Feb 21, 2004 - 4:10 PM
LatinKraze Well, i went to the shop today. (My baby is in the... Feb 23, 2004 - 12:06 PM
stelica85 whoa whoa just fix the slave cylinder first its li... Feb 23, 2004 - 5:43 PM
LatinKraze well, $245 to replace the master cylinder and... Feb 23, 2004 - 5:48 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 17th, 2026 - 2:23 PM |