 Timing belt pulley bolt won't come off!, Help please :-) |
 Jul 8, 2012 - 1:41 PM
|
 
|
|
Enthusiast  Joined Apr 14, '09 From Moreno Valley, CA Currently Offline Reputation: 0 (0%)  |
I have a 1996 Celica GTS Convertible with a 2.2. I need to replace the water pump and to do that need to remove the timing belt (arrgh!!!). I got it to to TDC and have good access to the 3/4" bolt and am using an impact wrench but still cannot get the bolt to come off. My impact wrench just goes and goes and my concern is that it is actually starting to round the bolt.
Any suggestions on how to get this thing off? Thanks! Wil |
 |
Replies
|
Aug 5, 2012 - 5:19 AM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
Sounds like your air compressor is too weak, you need a good compressor behind a good gun to run those out with any ease. Use a breaker bar with a pipe with the trans in 5th, parking brake set, and someone holding the brakes down.
-------------------- |
Posts in this topic
wilc4 Timing belt pulley bolt won't come off! Jul 8, 2012 - 1:41 PM
lagos Are you talking about the 19mm crank bolt?
Best w... Jul 8, 2012 - 2:00 PM 95CelicaST x2
Or if the motor won't start or is out of t... Jul 8, 2012 - 2:11 PM
xrav22 QUOTE (95CelicaST @ Jul 8, 2012 - 3... Jul 8, 2012 - 2:55 PM
wilc4 QUOTE (95CelicaST @ Jul 8, 2012 - 3... Jul 8, 2012 - 3:58 PM Spider77 QUOTE (wilc4 @ Jul 8, 2012 - 1:41 PM... Jul 8, 2012 - 3:42 PM 95CelicaST Never ever ever ever ever use standard sockets on ... Jul 8, 2012 - 7:17 PM mkernz22 Just an FYI, there are no bolts on said car that a... Jul 8, 2012 - 9:27 PM RobbMeeX Also Autozone can charge that battery for you for ... Jul 8, 2012 - 10:21 PM wilc4 Seriously, it is a month later and I've tried ... Aug 4, 2012 - 2:52 PM rave2n Hah, I just had to do this myself...took me about ... Aug 4, 2012 - 3:12 PM Special_Edy Lmao dude, there is no way you are gonna be able t... Aug 4, 2012 - 6:51 PM Jaytwou2 X3 on using the starter to remove the bolt... I re... Aug 4, 2012 - 7:59 PM SwissFerdi QUOTE (Jaytwou2 @ Aug 4, 2012 - 8:59... Aug 4, 2012 - 10:12 PM Jaytwou2 QUOTE (SwissFerdi @ Aug 4, 2012 - 11... Aug 5, 2012 - 7:06 PM wilc4 I will try a socket again, though I was getting en... Aug 4, 2012 - 8:52 PM Jaytwou2 QUOTE (wilc4 @ Aug 4, 2012 - 9:52 PM... Aug 4, 2012 - 9:21 PM Stambo x2 on getting a good compressor and impact. I... Aug 5, 2012 - 9:40 AM garin best guns out there are the ir titanium, snap on m... Aug 5, 2012 - 1:03 PM Special_Edy Everyone a 19mm and a 3/4" socket are the sam... Aug 5, 2012 - 2:59 PM mkernz22 QUOTE (Special_Edy @ Aug 5, 2012 - 3... Aug 5, 2012 - 9:45 PM Special_Edy QUOTE (mkernz22 @ Aug 5, 2012 - 10:4... Aug 6, 2012 - 8:07 AM 95CelicaST QUOTE 3/4" = 19.05mm. That is a narrow enoug... Aug 9, 2012 - 1:06 PM rave2n You can look in your closest for a steel bar...wor... Aug 9, 2012 - 1:11 PM Special_Edy QUOTE (rave2n @ Aug 9, 2012 - 1:11 P... Aug 9, 2012 - 1:42 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 12th, 2025 - 5:05 PM |