![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
So I'm going to be wiring up my fogs soon and what I'm planning to do is just reroute the wires to the sidemarker and send those straight to the fog lights and to splice in the sidemarkers to the turn signal's wires so they'll both blink.
Basically what I'm worried about is: Is this feasible? Will I be blowing fuses? Any input is appreciated. This post has been edited by HectortheRican: Aug 8, 2012 - 6:43 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
So I found a diagram to wire my fog lights independently and it'll work, but there's one part that is really confusing me.
From the switch, there's an in-line 2A glass fuse, but I have no idea what it's telling me to connect the other end to. That's my question. Maybe someone else can understand that part of the diagram. I've "circled" the area of the diagram that I'm referring to. ![]() -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Mar 24, '11 From 704 Currently Offline Reputation: 3 (100%) ![]() |
So I found a diagram to wire my fog lights independently and it'll work, but there's one part that is really confusing me. From the switch, there's an in-line 2A glass fuse, but I have no idea what it's telling me to connect the other end to. That's my question. Maybe someone else can understand that part of the diagram. I've "circled" the area of the diagram that I'm referring to. ![]() I'm not sure what 56B & 56A are in the head lamp socket are as I've never looked at it but its so your fogs toggle off when your highs are on or so I'd assume. |
![]() ![]() |
Lo-Fi Version | Time is now: August 22nd, 2025 - 1:53 PM |