FS. Front Bumper, USDM Stock Hood, USDM Fenders, Front Crash Bar, Tail, WRC Water Injection Pump, JDM water reservoir, RHD USDM Hood latch Options

[JohanFer]

Hi everyone, I have a few items left over after my front end conversion. I can guess on some of the things, but on others, I will ask for your help.

As for prices, make an offer and I will respond. The one with the best offered price will get it.

If I happen to sell something, I will be deleting the pictures here so you always know what is available.

Here are the items:

1. IC and Fuel Relay (Sold)
2. Water Injection Pump and Regulator 25 + shipping
3. JDM Water Reservoir 15 + shipping
4. Front Crash Bar 50 + shipping
5. Driver's Side Tail ligth 10 + shipping
6. USDM Stock Front bumper 150 pick up only
7. USDM Stock Hood 200 pick up only
8. USDM Fenders 60 and 70 for the right and left respectively
9. Hood latch for RHD with short hook 15 + shipping
10. Hatch with 3 post spoiler 200 pick up only
11. Two post spoiler 50 pick up only


The following five pictures are of the wiring harness that connects the headlamps, horns, fog lights and everything that is at the front of the car. It is cut at the ends, left and right, as you can see in the pictures.







This is the water injection pump and regulator for the WRC ST-205. It comes with all its connectors. The motors are there, but I think that one is busted. See the pictures




This is a JDM water reservoir.


This is the front crash bar with its supports.


This is the driver's side tail light. It is chipped, but if you have nothing, this would be better than nothing.


This is a USDM front bumper. It is in very good condition. Pearl in color.




This is the USDM stock hood as pictured in both sides. Pearl in color.




Both fenders, passenger side has a small dent at the front by the parking light, here are the pictures for their condition. Driver's side is perfect. Pearl in color.







Hood latch for Right Hand Drive with short hood. This can be used if you did a left hand drive conversion.




Three post hatch with spoiler



Two post spoiler



This post has been edited by JohanFer: Feb 16, 2013 - 2:55 AM

[JohanFer]

Did I mention that these parts came from a WRC model? I was reading about the spray that this model has for the sub-radiator. They were installed inside the crash bar and I think I have them somewhere. I will look for them and post them if there is an interest.