![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 23, '12 From northridge,CA Currently Offline Reputation: 3 (100%) ![]() |
Hello I have a 99 celica gt with only 95k miles when I bought at up until now I had this problem getting into gear at a full stop I'd clutch in and the shifter would be difficult to put it into gear very difficult it would click twice but u wouldn't feel the trans clucking or anything and when u drive it shifts just fine now I've replaced oem clutch slave and master and new fluid in the master cylinder bleeded the system and also changed the trans fluid and im still having this issue any ideas?
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
i'm having issues. I just replaced my car with a 11.4 pound flywheel, southbend pressure plate and clutch disc along with an oem throw out bearing. I also replaced the master and slave cylinder. Only put 2,600 miles on the car since. And have babied the car since the install.
I can shift into every gear just fine while the car is off without me pushing the clutch pedal. When the car is on and I push the clutch pedal to put it into first it won't go in at all even reverse is basically impossible. Once I eventually get it into first after like 10 try's and fiddling around, it'll shift into 2nd-5th no problem as long as your keeping the revs under 3,000 rpm. the main shifter cable looks like so. but I doubt this has to do with the problem right??? ![]() This post has been edited by BonzaiCelica: Oct 15, 2012 - 1:45 AM -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
![]() ![]() |
Lo-Fi Version | Time is now: August 26th, 2025 - 1:37 PM |