![]() |
![]() |
![]() |
|
Enthusiast Joined Aug 31, '12 From canada Currently Offline Reputation: 0 (0%) ![]() |
im gonna get a new non lsd transmission from mr2 1990 ,
i already have lsd e-153 but i burn it, does my axle will fit in the non lsd tranny ? (my axle is st185 outer and mr2 inner whit spacer) This post has been edited by 1000_needles: Sep 9, 2012 - 12:54 PM |
![]() |
![]() |
|
Enthusiast Joined Aug 31, '12 From canada Currently Offline Reputation: 0 (0%) ![]() |
i just find this, can someone comfirm that plz ?
¨^In this case, you can use either axles. LSD axles will fit both transmissions but non LSD axles will ONLY fit non LSD transmissions. There are a few other was to tell if its an LSD equipped trans. One, pull the speedo drive out and look at the diff itself. LSD diffs are machined, non LSD diffs are left rough casted. Two, look at the speedo drive gear on the diff, non LSD diffs will have a blue colored nylon gear where as LSD diffs will have a yellowish / Orange colored nylon drive gear. |
![]() ![]() |
Lo-Fi Version | Time is now: August 20th, 2025 - 3:25 AM |