Oil leaking from Input Shaft Seal?? 2nd Time replacing, Is something bent, or what???????? :/ Options

[injection]

Hey fellas, just had my new input shafts installed, and new seals as well, couple days of driving, and one seal is leaking bad! Like 6 inch puddle of gear oil I'n about 30secones bad!,
This is the second time I have replaced the seals, and still leaks, and I just had new Input Shafts installed as well, other ones were make thud sounds on lefts.......I am using the 5s tranny ( fwd ) with the st205 engine, have 285,000 KMs on the original GT tranny, a stage one clutch installed, and syncrohs feel really nice as well, any ideas why my seals keep blowing out?? I was told these trannys mate well with the st205, as long as your not tearing up the streets 24/7.... I'm thinkin something could be bent on my tranny, I think, or is there a tougher seal out there I can install???? Thanx fellas!

PS. The Input Shafts are the stock ones for the 5s Tranny of course, and the seals too

[alltracman78]

You've only got 1 input shaft.
And only 1 input shaft seal.

If you've got a new shaft and a new seal it sounds like the seal was installed wrong [EG not deep enough or the spring got knocked off].
Did you install it or a shop install it?