![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 17, '08 From JB MDL, NJ Currently Offline Reputation: 30 (100%) ![]() |
So lets say that my 94 5s bit the dust. If i were to swap in a 96+ 5s what kinds of things do i need to keep an eye on? Parts that are non inter hangeable, etc....
This post has been edited by Spider77: Sep 23, 2012 - 7:36 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 17, '08 From JB MDL, NJ Currently Offline Reputation: 30 (100%) ![]() |
So....its running....sorta. real bad at idle and has no pick up and go. New wires and plugs but still runs bad. I pulled the wires while it was running...pulling 2 and 3 made no difference....while pulling 1 and 4 killed the engine....im fairly sure i put the injectors in the correct order but would timing be an issue? Everything checked before i installed the motor....
Rechecked the fuel injector wiring....had 2 and 3 mixed up....fixed that....runs a touch better but still no low end.....im open to suggestions This post has been edited by Spider77: Sep 23, 2012 - 8:58 PM |
![]() ![]() |
Lo-Fi Version | Time is now: August 22nd, 2025 - 10:08 AM |