 Boosting Beams, Plans and improvement on those plans |
 Jul 5, 2012 - 11:40 PM
|
 
|
 Enthusiast  Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%)  |
I' ve been considering this as my build progresses and it's something I want to do after I get the car on the road.... but something I want to do nonetheless. I don't want a terribly high investment but 200+ WHP would be a great feeling.... and this is where I'm looking for expertise outside of mine....
Internals are remaining factory Looking at going with a supercharger and I don't really like how "cluttered" the engine bay looks with a turbo .... it also isn't as "peaky" and should be more smooth to the power My initial thought is that I want to keep the stock ECU so I'm assuming I have to stay at about 5psi or so for this to happen? I'm frankly not sure what the stock beams ecu can handle as far as boost is concerned. Any thoughts? What are my best tuning options? I want something that is tunable and the toyota ecu not be able to change it (if that makes sense... these things are smart) I want to keep the CR stock as well. With a proper tune, and the low boost numbers it shouldn't be a big deal I don't think, just gotta watch for knock Keeping the boost low like that, I'm HOPING that the stock fuel pump is adequate to handle the increased load... More importantly the injector size of the BEAMS has been debated. The books say 340 cc while the bench test hat the guy did on Daniels injectors reported 400 cc flat. If they are 400cc, I don't think I'll need to upgrade those either... but again, I just don't know. My biggest questions at the moment are involved around ECU and the tuning, but any and all help would be appreciated --------------------  |
 |
Replies
|
Oct 3, 2012 - 11:22 AM
|
|
 Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
yea they could of made it aluminum. Also to my surprise the 1990+ Acura NSX already made aluminum engines. I thought it was only late 90's technology.
btw smaay finish your swap already. that way we can have a meet in so cal and would like to see that v6 power! This post has been edited by BonzaiCelica: Oct 3, 2012 - 11:23 AM -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Posts in this topic
ricochet1490 Boosting Beams Jul 5, 2012 - 11:40 PM
njccmd2002 this will cost you a pretty penny, unfortunately i... Jul 6, 2012 - 12:07 AM delusionz doing the quick and dirty, maybe you should ask th... Jul 6, 2012 - 12:35 AM ricochet1490 The beams head flows better than a gen 3. And I... Jul 6, 2012 - 9:47 AM Syaoran First thing you have to consider is the chance of ... Jul 6, 2012 - 11:08 AM ricochet1490 I want to keep the good qualities of the beams if ... Jul 6, 2012 - 1:03 PM
Syaoran QUOTE (ricochet1490 @ Jul 6, 2012 - 2... Jul 6, 2012 - 1:27 PM ricochet1490 So check mark on the piggyback. Got it.
Now it sho... Jul 6, 2012 - 1:43 PM Syaoran QUOTE (ricochet1490 @ Jul 6, 2012 - 2... Jul 6, 2012 - 2:48 PM delusionz Yeah forget the high compression, even a stock gen... Jul 6, 2012 - 3:06 PM ricochet1490 As per toyo diy, the caldina turbo and the beams h... Jul 6, 2012 - 5:07 PM Syaoran I insist, what you want from the beams isn't t... Jul 6, 2012 - 5:20 PM richee3 Nobody is arguing that the 3S-GTE is better than t... Jul 6, 2012 - 5:42 PM ricochet1490 Dan you pretty much pegged it. Lol thanks buddy Jul 6, 2012 - 6:03 PM Smaay you guys and your Boners for BEAMS. Im still not i... Jul 6, 2012 - 6:50 PM ricochet1490 Smaay,
Thanks for the rod insight....
I almost d... Jul 6, 2012 - 7:39 PM Syaoran QUOTE (richee3 @ Jul 6, 2012 - 6:42 ... Jul 6, 2012 - 8:16 PM ricochet1490 So I learned today... to help answer some question... Jul 8, 2012 - 9:27 PM Neon90424 I thought caldina rods were made of cheese... Seem... Jul 16, 2012 - 6:38 AM ricochet1490 the trouble for me has been finding either an afte... Jul 16, 2012 - 9:28 AM kurt95gt QUOTE (ricochet1490 @ Jul 16, 2012 - 9... Jul 16, 2012 - 10:24 AM ricochet1490 triple post Jul 16, 2012 - 9:29 AM Syaoran Tuning a car isn't that hard, ESPECIALLY when ... Jul 16, 2012 - 11:24 AM ricochet1490 QUOTE (Syaoran @ Jul 16, 2012 - 11:2... Jul 18, 2012 - 9:12 PM 3WayStunna Think ill keep my eye on this thread; See how it d... Jul 16, 2012 - 11:25 AM Neon90424 theres a booosted Altezza down here...boosted blac... Jul 18, 2012 - 7:25 PM Syaoran The e-manage works on practically any car. You jus... Jul 18, 2012 - 9:42 PM SwissFerdi The supercharger idea seems interesting to me, bec... Jul 23, 2012 - 3:32 PM ricochet1490 QUOTE (SwissFerdi @ Jul 23, 2012 - 3... Jul 23, 2012 - 5:07 PM Syaoran A supercharger isn't better or safer than a tu... Jul 24, 2012 - 11:02 AM ricochet1490 QUOTE (Syaoran @ Jul 24, 2012 - 11:0... Jul 24, 2012 - 11:39 AM KAOS Very interested to see how this turns out. Jul 24, 2012 - 12:59 PM ricochet1490 what do the pros think?
http://www.ebay.com/itm/Br... Jul 26, 2012 - 5:58 PM ricochet1490 better yet....
http://cgi.ebay.com/ws/eBayISAPI.dl... Jul 26, 2012 - 10:52 PM delusionz you need atleast a t28 spec turbo for a 2L, that l... Jul 27, 2012 - 10:32 AM delusionz a regular t28bb non-rs would be best bet for a tur... Jul 27, 2012 - 10:52 AM ricochet1490 Delusionz - I wish we had a "thank" butt... Jul 27, 2012 - 8:02 PM delusionz http://www.turbobygarrett.com/turbobygarrett/turbo... Jul 29, 2012 - 8:21 PM Syaoran Here's an item you could look into:
http://ww... Aug 4, 2012 - 8:35 PM Neon90424 I did the same thing have the same manifold, order... Aug 6, 2012 - 12:58 AM 3WayStunna I would take a read at this mans testimonial...And... Aug 6, 2012 - 3:58 PM ricochet1490 links already posted on page 1. read them both. Bu... Aug 6, 2012 - 9:56 PM 3WayStunna QUOTE (ricochet1490 @ Aug 6, 2012 - 9... Aug 8, 2012 - 10:15 AM BonzaiCelica http://www.mr2.com/forums/beams-parts-swap...et-up... Sep 28, 2012 - 6:32 PM ricochet1490 holy shat..... i'm speecheless Sep 28, 2012 - 7:03 PM BonzaiCelica that would be nice!! for $3,600 plus ... Sep 28, 2012 - 11:29 PM njccmd2002 after so much money he quit?
he spent years devel... Sep 30, 2012 - 8:54 AM richee3 He's not quitting. He's going bigger. Sep 30, 2012 - 9:20 AM njccmd2002 I think hes going to sell it... but then again may... Sep 30, 2012 - 9:36 PM Smaay that is not worth it to me. i wouldnt spend anywhe... Oct 1, 2012 - 8:32 AM kurt95gt Seems like a lot of work to end up with a 3sgte wi... Oct 1, 2012 - 9:45 AM BonzaiCelica GEEZ ALL YOU DEBBIE DOWNERS, we know you can spend... Oct 1, 2012 - 12:19 PM Smaay i dont know what everyone fascination with the BEA... Oct 1, 2012 - 3:04 PM ricochet1490 They could have made it out of aluminum.... you an... Oct 1, 2012 - 6:41 PM kurt95gt The v6 is more about the two lol
It feels a lot f... Oct 1, 2012 - 8:05 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 5:50 PM |