Oct 8, 2012 - 9:24 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Feb 14, '09 From Mid West Currently Offline Reputation: 7 (100%) |
After doing fender & bumper cover replacement, the right fender bulb went out. No biggie--got new 194 bulbs & replaced both.
On the way home from work, I noticed the temp got higher than it normally gets. Here's the deal-- Only have 1 fan that a PO had wired to the ignition, so it always come on when I start the Celica. Get home from& checked the fan-- nope, not running! Here is my Q-- I don't have access to a millimeter, I do have the thing that lights up when it gets power. What wire(s) should I test? Did NOT get over heated. Checking fuses when I get home tomorrow night. Tips & advice Greatly Appreciated!!! Thanks |
![]() |
Oct 8, 2012 - 10:37 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) |
If its hooked up directly to 12V and it doesn't come on when your car is running then most likely your fan motor died. Unless by god, someone wired it up using a relay then I would suggest you check out the Fan relay and see if its still good.
|
Bigblock Cooling fan Oct 8, 2012 - 9:24 PM
Bigblock Thanks for the reply soulshadow!
I'll loo... Oct 9, 2012 - 5:12 AM
zfjohnson07 just run a wire to your battery to see if it even ... Oct 9, 2012 - 4:13 PM
Bigblock How the heck do I unplug the connector that's ... Oct 9, 2012 - 9:50 PM
Bigblock Fan motor is dead!
Thanks for the help!... Oct 10, 2012 - 4:03 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 4th, 2025 - 5:20 PM |