6G Celicas Forums

Welcome Guest ( Log In | Register )

> Will a 00-02 steering wheel fit on a 98?
post Oct 28, 2012 - 3:00 PM
+Quote Post
MFWINTERS

Enthusiast

Joined Oct 21, '12
From Phoenix, az
Currently Offline

Reputation: 0 (0%)




Hi,

I am looking to put a new steering wheel on my car, mine is worn out.

Will a 00-02 bolt straight on to a 98 GT. From the looks of it, it should? Any advice before I buy one?


Thanks.
 
Start new topic
Replies
post Oct 30, 2012 - 10:32 AM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




yes it bolts right on, just take the airbag off, then unbolt the wheel. wiggle it off, you dont need a puller. then put on the 7th gen wheel. you have to use the 6th gen cruise control and hold it in with screws. the airbag i de-pinned the connector and just spliced them together. there is an adapter out there but its hard to find.

here is a copy paste from my thread on Supraforums, the Supra is the same setup

ok i went out and took pics and realized that i never finished the Supra, i did the wiring splice on my 6th gen celica. They both are the same. when i bring the car home from the shop ill take the wheel off and get pics. but here is what i have so far. what i do know is I de-pinned the car side and cut the airbag side and then spliced them together permanently. I think what ill do on the Supra is make quick disconnects so its not permanent.



















here is a link to the entire thread http://www.supraforums.com/forum/showthrea...highlight=wheel


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 20th, 2025 - 1:50 PM