![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jan 25, '06 From Marlton, NJ Currently Offline Reputation: 0 (0%) ![]() |
Hey everyone. Im known as Jay Kamakaze I started JM Exclusive tricking out cars and my lab rat of a 97 Celica ST has taken so much beating from me with tons of installs ive done to learn fabrication and custom installs. Ive installed, removed, installed, removed. Ive even posted previous installs on this site. Now Ive reached as place where Im comfortable with my fabrication and my skills to do one complete build. The car is near finished already but i chose 6GC to start my build log of everything i did and how i got there.
This log includes sooo much custom (even down to the wiring), I guarantee this is a one of a kind Celica. Some highlights I will get to: -Dual CarPCs -RFID Keyless Ignition (my own design, don't bother asking for diagram) -Modded XBOX360 -PC Controlled Lighting -Touchscreen Speedo -Centerconsole Build -Dashboard Build -Trunk build -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jan 25, '06 From Marlton, NJ Currently Offline Reputation: 0 (0%) ![]() |
Now I def wanted to get rid of the box that the Kicker L5 sub came in and
do my own fiberglass box (save more room). I already had a previously installed Xbox 360 on the left side so it was only natural to take up the opposite corner. Masked that corner off and laid down my resin/fiberglass to make the mold. From the mold I built the frame for my kicker. Took me awhile to figure the best position but I chose it to face the xbox enclosure to keep a solid flow between all the pieces. ![]() ![]() Wrapped the frame with fleece and soaked in resin and applied a couple of layers of fiberglass ![]() ![]() ![]() ![]() ![]() -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: June 13th, 2025 - 7:28 PM |