MSD ignition SCREWED up my car!!, HELP Options

[Celica2085TA]

i installed the msd ignition kit in my celica and it wouldent work. I hooked up the wires like it said in the manul and it wouldent start. so i disconnected everything and put it all back together and now my car won't start. Please help me what is wrong with it and what shuld I do???

[toyotaspeed_90]

you shouldn't have done any damage... i have a 6al, blaster 2 coil, and 8910 eis tach adapter (i'm having HUGE problems because my ignitor, which was an externally mounted internal ignitor went out)..... we tried wiring around having to use either the stock ignitor or the tach adapter and it didn't work... i can guarantee you that it will give a hotter spark... trust me, it shocked me today (damn that hurt)

get a tach adapter a blaster 2 coil, and a coil tower adapter (this you'll need... to go from an internal to external coil)..... the negative coil wire goes to the black wire on the 8910 eis... the brown wire (12 volt positive... it's just an ignition turn on) will go to the red on the 6al and the 8910 eis... plug the 8910 eis into the 6al plug (it only goes in one way)... the black from the 6al goes to the negative on the blaster 2 coil, and the orange from the 6al goes to the positive on the coil....

watch out though, as i found out... hotter spark on cheap cap & rotor = melting parts.....