 Could someone identify this? |
 Dec 14, 2012 - 4:50 AM
|
 
|
|
Enthusiast  Joined Nov 13, '12 From Sacramento Currently Offline Reputation: 0 (0%)  |
Hi 6GC owners!
So I've been working on changing the clutch on my celica but I ran into a problem. Could someone help me identify the name of this part (this is on the transmission, towards the back)? But more importantly, how do I take it off? There doesn't feel like a release button where I can just pull it off.. There is also 3 screws and a small bolt holding it, but I'm very hesitant to take those off. Should I take those screws off? How would I go about unplugging this part? 
This post has been edited by 1994whitecelicagt: Dec 14, 2012 - 4:53 AM |
 |
Replies
|
Dec 15, 2012 - 1:58 PM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
Squeeze tab with pliers, use screw driver between sensor and connector to start moving off, then once its cleared the lock tab it should wiggle off. Sometimes I need use to use a pick to lift the clip off the tab then use the screw driver for leverage. I find that dousing the connection in silicone spray lube after cleaning it with brake cleaner usually helps. I've even had to go so far as to gently heat some with a heat gun to un seize them! Luckily never on a Toyota, just an old Ford from the 80's. The plastic halves had melted together from heat and I had to un-melt them a little.
-------------------- |
Posts in this topic
1994whitecelicagt Could someone identify this? Dec 14, 2012 - 4:50 AM
nsxtypeR Looks like the speedsensor to me. Never took it of... Dec 14, 2012 - 6:31 AM njccmd2002 i see some screws there, but it should come out as... Dec 14, 2012 - 6:49 AM richee3 Speed sensor. It takes some effort but it will unp... Dec 14, 2012 - 6:52 AM rave2n SQEEEEEEEZZZZZZEEEE Dec 14, 2012 - 8:23 AM Bitter Clean it down with brake cleaner so you can get a ... Dec 14, 2012 - 8:35 AM mkernz22 I remeber taking that plug off lol boy was it fun Dec 14, 2012 - 9:31 AM Ted95 just take a flat head screw driver, theres a tab o... Dec 14, 2012 - 9:33 AM 1994whitecelicagt Thanks everybody! I started taking one of the ... Dec 14, 2012 - 12:16 PM Smaay no no no, do not use a screwdriver. just pinch it ... Dec 14, 2012 - 10:06 PM
czwalga QUOTE (Smaay @ Dec 14, 2012 - 10:06 ... Dec 15, 2012 - 11:59 AM Special_Edy Here in North Texas they are brittle as hell. I al... Dec 15, 2012 - 1:19 PM Smaay oh they get plenty brittle here too, but using s s... Dec 15, 2012 - 1:41 PM 1994whitecelicagt I finally got it off after dosing it with some bra... Dec 16, 2012 - 1:40 PM Ted95 never had an issue here with the method, but glad ... Dec 17, 2012 - 7:26 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 21st, 2025 - 4:33 PM |