![]() |
![]() |
![]() |
|
Enthusiast Joined Dec 18, '08 From Oxford, England Currently Offline Reputation: 0 (0%) ![]() |
I recently overhauled both rear calipers and now i've put them back on they require bleeding. With the help of a friend who did the pedal pushing I first bled the rear left (passenger, uk) caliper which went fine. However the rear right one just will not bleed. Nothing comes out as far as I can tell, not even air. I have taken the bleed nipple off and it is not obstructed, i can blow air through it. What the hell is causing this? I'd really appreciate some help as the weather is grim and my only other means of transportation is a motorbike.
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) ![]() |
you could tell if its a brake booster. usually you can test this by pumping on the brakes multiple times and hold, then turn on the car, and then the pedal should sink. I know theres a few other ways. The other way to tell is hard to brake or a leak on the booster you would hear air.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() ![]() |
Lo-Fi Version | Time is now: July 20th, 2025 - 1:22 PM |