![]() |
![]() |
![]() |
|
Enthusiast Joined Dec 18, '08 From Oxford, England Currently Offline Reputation: 0 (0%) ![]() |
I recently overhauled both rear calipers and now i've put them back on they require bleeding. With the help of a friend who did the pedal pushing I first bled the rear left (passenger, uk) caliper which went fine. However the rear right one just will not bleed. Nothing comes out as far as I can tell, not even air. I have taken the bleed nipple off and it is not obstructed, i can blow air through it. What the hell is causing this? I'd really appreciate some help as the weather is grim and my only other means of transportation is a motorbike.
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%) ![]() |
No problems glad you got it solved. It can take a long time go bleed out manually. A good tip is when you open the bleeder screw you can cover it with your finger to tell if there is any air.
-------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
![]() ![]() |
Lo-Fi Version | Time is now: July 20th, 2025 - 7:11 PM |