Dec 15, 2012 - 5:36 PM
|
|
|
Enthusiast ![]() Joined Jan 27, '08 From Mass Currently Offline Reputation: 6 (100%) |
I have a 95 st and it is now running very rough and misfiring. it won't go about 3000rpm as the ecu cuts the fuel. I have a check engine light, but when I short the e1 and te1 pins nothing happens. Is there another way to get the code?
|
![]() |
Dec 22, 2012 - 1:14 PM
|
|
|
Enthusiast ![]() Joined Jan 27, '08 From Mass Currently Offline Reputation: 6 (100%) |
I figured I would post and update in case this happens to anyone else. After replacing my ecu the car runs great. No CEL and no misfiring nothing.
So long story short, if your pre96 celica throws a CEL and you can't retrieve it and all the sensor and voltages check out at the ecu, then it's time to replace the ecu. |
rivs CEL on but can't get code Dec 15, 2012 - 5:36 PM
Smaay do you turn the key to the on position when you do... Dec 15, 2012 - 8:22 PM
rivs QUOTE (Smaay @ Dec 15, 2012 - 8:22 P... Dec 15, 2012 - 8:25 PM
Smaay something is wrong then. are you sure you are jump... Dec 15, 2012 - 11:20 PM
rivs QUOTE (Smaay @ Dec 15, 2012 - 11:20 ... Dec 15, 2012 - 11:46 PM
Smaay that is possible. not common bit possible Dec 16, 2012 - 1:05 AM
Special_Edy Maybe she'll give it up after dinner and a mov... Dec 16, 2012 - 12:00 PM
rivs QUOTE (Special_Edy @ Dec 16, 2012 - 12... Dec 16, 2012 - 3:00 PM
Box Code scanner. Advanced Auto Parts and/or Autozone... Dec 16, 2012 - 3:07 PM
ILoveMySilly97 QUOTE (Box @ Dec 16, 2012 - 1:07 PM)... Dec 16, 2012 - 5:36 PM
Smaay that only works on ODBII cars. this is a 95 so its... Dec 18, 2012 - 11:56 AM
Box QUOTE (Smaay @ Dec 18, 2012 - 10:56 ... Dec 18, 2012 - 12:03 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 7th, 2025 - 1:28 PM |