 My new Celica ST205 GT4 |
 Dec 28, 2012 - 7:36 PM
|
 
|
|
Enthusiast  Joined Jul 13, '11 From Lincs, UK Currently Offline Reputation: 0 (0%)  |
Hello,
Pretty much a lurker of the forum but thought I would share. After a very short period of no Gen 6 ownership I bought another GT4. It had pretty much the spec what I wanted to get my previous car to and was a very nice example so it made sense. I might get slated for buying a pre-modified car but I don't care to be honest! 1994 Celica ST205 GT4 JDM Spec: Engine etc: Garrett Ball bearing GT3071r kit (4" intake version) with Tial external wastegate, 3" downpipe and screamer pipe Apexi PFC and Commander Mapped by Ryan G from 2Bartuning Sard 800's Ported manifold 3" Japspeed stainless steel exhaust Blitz SBC -ID III -Spec R and Blitz power meter Innovate wideband sensor with afr gauge Walbro 255 fuel pump Straight intake with big K+N filter Magnecor KV85 8.5mm leads Evo 8 fmic Blitz bov Omex rev limiter/launch control operated from clutch pedal switch Suspension/brakes: BC coilovers Grooved Toyota front discs,ebc rear discs and yellow stuff pads front and rear Whiteline adjustable rear arb Hel brake hoses Cooling: RTP alloy radiator Slim fans with override switch TRD thermostat Turbo pre rad cooler Mocal oil cooler Mocal thermostatic sandwich plate Mocal braided hoses C-One cooling panel Swirl pot and header tank system Silicone hoses Interior: Momo steering wheel Momo alloy gear knob Alloy pedals White Dials switchable from green to blue Full leather interior Carbon fibre dash bits Exterior: Carbon fibre wind deflectors Carbon fibre door sills TRD side skirts and side spats De-tangoed Later lights Spoiler riser blocks Cat1 Alarm and immobiliser      |
 |
Replies
|
Jan 7, 2013 - 5:30 AM
|
|
 Enthusiast Joined Aug 11, '08 From London Currently Offline Reputation: 7 (100%) |
Unfortunately Alex we no longer sell those rads so count your self lucky to have had one of these.
However with enough demand, Im sure we can make some more. Also Alex, can you tell me about your header tank. Where does it tap into the cooling system? Is it plummed all the way round to the inlet before the thermostat at the opposite corner? |
Posts in this topic
alex1981 My new Celica ST205 GT4 Dec 28, 2012 - 7:36 PM
Wolfsting nice , good to see another uk owner as well Dec 28, 2012 - 8:55 PM Neon90424 very nice car!
I believe the original C-ONE c... Dec 28, 2012 - 10:32 PM alex1981 Thanks guys
I wouldn't know if it was a genu... Dec 29, 2012 - 5:56 AM S8S8 Looks awesome. Nice purchase.
QUOTE (alex1981 ... Dec 29, 2012 - 7:23 AM alex1981 Thanks
Indeed. Don't get me wrong - I love t... Dec 29, 2012 - 7:39 AM Neon90424 1,6 bar, and no smoking? you sure thats not forged... Dec 29, 2012 - 8:01 AM alex1981 No smoking, turbo picks up hard from low revs all ... Dec 29, 2012 - 8:11 AM Neon90424 I never understood why they left a gap in the repl... Dec 29, 2012 - 8:29 AM yellowchinaman hi Alex. Ray here at RTP. Did yiu ever get that dy... Dec 29, 2012 - 10:11 AM johnyboy1976 Looks like a car belonging to a old GT4OC member f... Dec 29, 2012 - 10:17 AM alex1981 Correct Johny
Ray: No idea who did the plumbing ... Dec 29, 2012 - 10:27 AM Neon90424 I wonder why they kept the stock exhaust manifold.... Dec 29, 2012 - 10:52 AM alex1981 What manifold would you suggest, then? Or is it a ... Dec 29, 2012 - 11:02 AM alex1981 Thinking about what you said...I assume you have a... Dec 29, 2012 - 11:20 AM alex1981 Nipped out and took an interior shot. Sorry for th... Dec 29, 2012 - 11:35 AM johnyboy1976 Standard manifold is strong and wont break and if ... Dec 29, 2012 - 12:53 PM yellowchinaman As johny said. unless youre running very big hp th... Dec 29, 2012 - 1:10 PM alex1981 Ah fair enough. What power do you think the stock ... Dec 29, 2012 - 1:40 PM
SwissFerdi QUOTE (alex1981 @ Dec 29, 2012 - 1:4... Dec 29, 2012 - 2:33 PM RobStar86 Beautiful GT-Four! Dec 29, 2012 - 2:09 PM alex1981 Thanks Ferdi :-) Dec 29, 2012 - 2:36 PM johnyboy1976 Another one but with late specs - the wifes car Dec 29, 2012 - 3:48 PM alex1981 Cool :-) just need to see a silver one! Dec 29, 2012 - 3:53 PM johnyboy1976 RE: My new Celica ST205 GT4 Dec 29, 2012 - 4:08 PM alex1981 Cheers :-) will have a think on it :-) Dec 29, 2012 - 4:26 PM delusionz hey bro really nice car, especially the bodywork
... Dec 29, 2012 - 6:30 PM alex1981 Thanks
I do not have the FC Datalogit I am afrai... Dec 29, 2012 - 6:44 PM alex1981 Few more pics for you - taken by Loki Powers Photo... Jan 2, 2013 - 8:58 PM delusionz and wheres the pressure release!!! Jan 7, 2013 - 5:39 AM alex1981 Ah fair enough if you don't sell them. If you ... Jan 7, 2013 - 6:18 AM yellowchinaman QUOTE (alex1981 @ Jan 7, 2013 - 6:18... Jan 7, 2013 - 7:30 AM alex1981 Sorry yes should have added there is a pipe from t... Jan 7, 2013 - 8:49 AM yellowchinaman Thanks Alex
That explains a lot. I'm going for... Jan 7, 2013 - 9:10 AM alex1981 It might just about fit there if it sat as low ont... Jan 7, 2013 - 9:53 AM yellowchinaman QUOTE (alex1981 @ Jan 7, 2013 - 9:53... Jan 7, 2013 - 12:48 PM alex1981 Comment about pressure release. Actually, that is ... Jan 26, 2013 - 8:08 AM alex1981 Just a little update. Currently in the bodyshop ge... Aug 28, 2013 - 1:47 PM alex1981 So....to expand on the bodywork bits.
I took the ... Oct 30, 2013 - 4:43 PM alex1981 Weeks later I went over to the bodyshop. It felt l... Oct 30, 2013 - 5:02 PM JoshuaM Wow, that's a lot of work! Have you given ... Oct 30, 2013 - 5:19 PM alex1981 That must be irritating!
Yeah not much is bei... Oct 30, 2013 - 7:35 PM alex1981 Got 6 new wheels (yes, 6, don't ask!) whic... Nov 22, 2013 - 11:11 AM alex1981 Oh I should have said I have also put an order in ... Nov 22, 2013 - 11:16 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 24th, 2025 - 1:12 PM |