Supra Front Conversion, Progression Thread (New Pics) Options

[mgnt232]

NEW PICS in posts with dates (20121225)

OK finally got home to do this. Only was out there for a couple hours, most of which was mounting the intercooler.
But got alot done surprisingly.
Alot more to go but while waiting on the rest of the 3s parts im going to finish this off.

And for the love of god I know what I'm doing, it will end up fine.



Got the bumper realized supras fronts are like a foot wider than celicas







...... so i cut it in half



And just started to fit it and grind away at what was in the way






After a bit of test fitting, started to fill the huge gaps.







Got dark like 20 mins after this picture so i had to stop. Should have them both ready for fiberglass by tomorrow, as long as it doesnt snow!


This post has been edited by mgnt232: Jan 2, 2013 - 5:19 PM

[mgnt232]

20130108
Well only got like 2 hours to work on this, and most of it was just sanding. But most of the work is done now, just hours and hours of sanding to come. Will have pics tomorrow of it with the lights in but figured id put these pics up now.













































Got the lights wired up too while a coat was drying



Did a little work on the rear as well. Thats pretty much done, and got all the wiring done



Then installed the box I made a couple weeks back. Have the sides pretty much done too (goes around the top so there isnt the big gaps on the sides) but they aren't at this house.