![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Feb 14, '09 From Mid West Currently Offline Reputation: 7 (100%) ![]() |
So we had a lil bit of rain. My passenger side hi-beam is 1/2 full of water!!..
![]() Removing bumper is NOT going to happen!! SO-- Can I drill a small hole for it to empty out then smear silicone over it to seal it, then peel it off if //when it happens again?.. ![]() I CAN use just the lows but it was great having hi's out on the country roads we drive to & from work making it way easier to see road verman & deer.. ![]() Yup I did a search & wish it were only condensation, but I am definitely NOT pulling the bumper cover!! I don't have the time to have it layed up again when I break stuff pulling it off!!!! !!!ALWAYS HAPPENS TO BE MY LUCK!!!.. ![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Feb 14, '09 From Mid West Currently Offline Reputation: 7 (100%) ![]() |
Hammer is tempting...but then...maybe not...
![]() Tomorow I'll drill the hole, heat it up, re-seal it. It is a new headlight!! BOOOO!!!... ![]() Thanks for the help // tips // confirmation!! GREATLY APPRECIATED!!!... ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 25th, 2025 - 4:35 PM |