 Some TB vac. questions |
 Apr 12, 2007 - 1:59 PM
|
 
|
 Enthusiast  Joined Oct 5, '03 From South TX. Currently Offline Reputation: 14 (100%)  |
So on my 3s, there are 2 ports that come out of the throttle body, are they both supposed to be under vac.?
The reason I ask is because my car has crappy vac now at idle, 15 when the fuel pump sounds like its pumping at a fast pace, then the fuel pump clicks into a slower pace and drops to 10vac. and it basically idles like crap and trembles and stutters... On mine only one side does anything, im using that port for my BOV and my Boost/Vac guage, the other one is connected to the charcoal canister, is that where its supposed to go? Since the port connected to the canister is dead, i want to know if the cansiter is supposed to be under vac. I tried putting that red hose that goes to the canister at the T in place of the BOV to see what it does, the idle stabilizes nicely but at a higher rpm, and the guage reads that it runs at "0" so at atmospheric pressure. I ask for a few words of wisdom, thanks 
|
Posts in this topic
95celgt Some TB vac. questions Apr 12, 2007 - 1:59 PM
95celgt RE: Some TB vac. questions Apr 12, 2007 - 2:06 PM Gary If you are talking about 2 small ports on the top ... Apr 12, 2007 - 3:41 PM x_itchy_b_x side note. neat idea in that pic with the TB inter... Apr 13, 2007 - 7:16 AM 95celgt the welded flange?
So should the canister be unde... Apr 13, 2007 - 10:51 AM
phattyduck QUOTE(95celgt @ Apr 13, 2007 - 8:51 ... Apr 13, 2007 - 4:56 PM Gary From the picture, that is 2nd gen engine.
Both por... Apr 13, 2007 - 8:12 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 1st, 2025 - 10:36 AM |