SERIOUS PROBLEM: No Signals, problem somewhat solved. Options

[vile_v]

Hi my name is Jason, i dont post much or ask for questions but this is the first serious problem that has got me stumped.

PROBLEM: no signals (working prior to my removal/attemp repair of hazard lights buttons)

Some info.
Originally when i press the hazard lights button, the left turn signal would just stay on and i couldn't use my turn signals. But when the hazard lights were off, signals worked. Same symptons as [2slow2nervous] So today i removed the hazard signal button attempting to clean it up hoping it would work. I was able to take it apart and cleaned it up, I THINK I ASSEMBLED IT PROPERLY BACK TOGETHER I connected it back together and nothing happen so i was thinking, " didn't work, oh well." Later in the evening i went to the store and was signaling at an intersection only to realize my signal dont work anymore. ( i got a lot of honks and fingers for that)


I first check both fuses to see if any were dead, the hazards fuse was. I replaced it; didn't work. The turn signal fuse was good. The i removed my entire console, tyring to repair wires that look loose; didn't work. I also reopened the hazard lights button but ended up snapping some of the small plastic pieces and is now broken for sure. I did not touch the dimmer switch.

Question for you guys.
Has anyone else experience this before, if so what did you do? Do you know if the signals and hazards lights are one complete circuit, meaning i would need a new hazard lights button to make it all work again. Lastly any suggestions?

I apologize for making you guys read so much. Thanks for all your input too!

This post has been edited by vile_v: Sep 12, 2007 - 8:40 PM