Projector low beam and clear high beam, A lot of photo's clearing things up Options

[Paul_Celica_GT]

Here's how I've done my projector conversion. I followed the guidelines of two dutch Celicas.eu members, Kadett en BacerTune:

The projectors





Removing small parts



In the oven



Remove the glass with a plastic object to prevent damaging the glass



Remove Projector



Remove magnifying glass



Remove the metal thing by unscrewing the adjusting bolts



Cut the straight side



Straighten the diagonal side by attaching a metal plate





Attach everything in reverse order, before attaching the glass put both side in the oven. When the kit is soft add some new kit and attach the glass to the rest. After eveything has cooled down, assemble the small parts. The projector back together again:



After both are converted it's time to install them. This is how the car looked like with the old headlights:



This post has been edited by Paul_Celica_GT: Nov 27, 2007 - 5:16 PM