SO, i thought i was done, But wait~ deeaaasshhhhh mooooorrreeee Options

[posthum_n]

okay, so my clutch went out, i decide to change it......and do some other stuff to...(header, hot wires, and good tune up)

so i get it all out, and got it all put back.



my front left caliper now has a leak.....but it didn't look like it leaked at the piston...why?



when i had it on a jackstands i tested to make sure no chatter and that the tranny shifter smoothly.....everything was fine and tight.

when i drove it around the block it sounded fine.


i got on the interstate and drove maybe 10 miles and when i take off after stopping from the first time...it makes a clunk clunk clunk and sorta shakes when the clutch is say 1/3 of the way let off

the axles are 6 months old and the mounts were tighted and the rubber in them looked good.

any ideas?




also, since the header i lost alot of low end torque why?