Apr 29, 2009 - 3:21 PM
|
|
|
Enthusiast ![]() ![]() Joined Jul 5, '03 From Scotland , Uk Currently Offline Reputation: 0 (0%) |
Hi guys
My MOT runs out on fri Below are pictures of the inside of the old discs, as you can see they are a tad rusty where they shouldn't be , is this a sign of seized pistons?? the sliders were all free and the pistons did go back in all be it not so easy (only had a screw driver). drivers front ![]() passenger front ![]() all 4 ![]() this is how the new disks, as you can see the rears arent doing much and the 1 front discs is still score free near the hub ns rear ![]() os rear ![]() os front ![]() can i really have 4 seized callipers?? they worked fine before i changed the discs or could it be that i haven't pushed the pistons on the callipers back far enough, if so what size of g clamp do i need to buy?? the front pads all had 2 anti squeal pads each and the rear had 1 per pad, my last celica never had any and never squealed. im just a tad stumped as i did this with my last celica (a few times) without any trouble.. so HELP lol Kev -------------------- |
kevstir new brakes are crap Apr 29, 2009 - 3:21 PM
LewFX Did you bleed the brake lines? Apr 29, 2009 - 4:26 PM
Lone_Wolf You need to bleed the brakes either that or one of... Apr 29, 2009 - 5:26 PM
GriffGirl uh, yeah, bleed em and bleed 'em good. You... Apr 29, 2009 - 5:56 PM
Followtheornghat X2 on the brake bleed, and also check your lines, ... Apr 29, 2009 - 8:02 PM
azian_advanced new pads and discs need some time to settle.. my d... Apr 29, 2009 - 8:13 PM
Nial QUOTE (azian_advanced @ Apr 29, 2009 - 9... Apr 30, 2009 - 1:18 AM
kamax bleed the brakes, and the smokes could be from you... Apr 30, 2009 - 2:35 AM
Galcobar After you've bled the brakes, you might want t... Apr 30, 2009 - 3:37 AM
playr158 QUOTE (Galcobar @ Apr 30, 2009 - 4:3... Apr 30, 2009 - 7:20 AM
presure2 did you just install the rotors, without any clean... Apr 30, 2009 - 7:58 AM
kevstir no didn't bleed them guys, as they felt fine w... Apr 30, 2009 - 11:47 AM
Stambo did you clean up the slides on the caliper mount a... Apr 30, 2009 - 8:48 PM
azn87 i had juss changed my rears pads and rotor, did u ... Apr 30, 2009 - 11:29 PM
playr158 ^ Dude you don't break things in by riding on ... May 1, 2009 - 6:24 AM
kevstir well today i took the anti squeal pads off (comple... May 2, 2009 - 7:38 PM
kevstir having a bit of a look about im starting to think ... May 3, 2009 - 8:29 AM
kevstir well finally got somewhere, NIPPARTS brake pads ar... May 8, 2009 - 6:24 PM
Stambo Sucks that you had to figure out the hard way. But... May 9, 2009 - 1:23 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 16th, 2025 - 6:56 PM |